WOCA Diamond Oil Natural - When a high quality finish is required on new or sanded timber, WOCA Diamond Oil Natural will create an exceptionally hardwearing surface with outstanding resistance to water and stains.
WOCA Diamond Oil is a unique professional oil treatment system which is easy to use, fast drying and requires only one coat.
It has low viscosity, producing a high amount of saturation with excellent coverage.
Diamond Oil is suitable for interior woodwork only, and can be used on both hardwood and softwood flooring, timber ceilings and wall panelling.
Also available: WOCA Diamond Oil White to create a pale, tinted effect to woodwork, and WOCA Diamond Oil Extra White which will give a deeper white finish to woodwork.
Please see the INFO tab above for full Preparation and Application advice.
Please see our WOCA section for the full range of products available including the Woca Doodlebug Applicator and Kits.
Coverage upto 20 SqMtrs per Litre per Coat
1 coat required
Clean equipment with White Spirits
WOCA Diamond Oil Natural Reviews
| UK Mainland|
2-3 Days 1
FREE - Orders over £40
| Express Delivery||Next Working Day 1||£4.95|
£2.50 - Orders over £40
| Premium AM||Mon-Fri Pre 12|
Mon-Fri Pre 10.30AM
| Premium Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Woca Diamond Oil Natural:
Preparation: A short-haired paint roller is the easiest way to apply the oil, together with a plastic paint tray and absorbent cloths. Either a WOCA Doodlebug (or Polishing Machine for larger floors) is required for spreading the oil and buffing a treated floor. Rollers and equipment can be cleaned after use with WOCA solvent. Keep the oil out of reach of children and locked away after use. Oil-soaked cloths are a fire risk, so dispose of them in a tightly-closed container on completion.
Application: Sand all surfaces with 120 grit abrasive, then vacuum to remove all dust. If necessary, treat with WOCA Wood Cleaner (mixed 1:40 with water) before using the oil. Allow woodwork to dry fully. Shake the container well, mixing any oil with different batch numbers to maintain an even colour balance.
Pour oil into the tray and apply an even coat by roller to an area of floor between 5 and 10m2. Allow this to soak in for up to 10 minutes, adding further oil if dry spots become visible. Polish the treated area with a Doodlebug (fitted with beige pad) until the surface appears saturated. Then use a cotton cloth under the pad to absorb surplus oil. Work in a similar way across the entire floor, ensuring the surface does not look wet with no excess oil after polishing.
Leave to dry for 6 to 8 hours, then buff the floor with a white pad, used dry. Do not use the floor for 24 hours if possible. Allow 3 days for the surface to fully harden (18 degrees C), avoiding high humidity. Finally, treat the floor with WOCA Natural Soap or Oil Refresher to create a protective layer.
Natural – for a clear finish to enhance natural colour of timber
White – to create a pale, tinted effect to woodwork
Extra White – will give a deeper white finish to woodwork
Available sizes: 25ml sample, 2.5 litre
Coverage: 20 to 25 sq m per litre
Drying time: 6 to 8 hours, 24 hours fully hardened
Clean equipment: WOCA solvent or white spirit