Rustins Plastic Floor Coating Satin 4 litre is a two-part cold cure floor lacquer that has first-rate adhesion and long lasting performance, it is guaranteed not to craze or yellow with age and is an almost colourless lacquer.
Also available: Rustins Plastic Floor Coating 1 Litre.
Rustins Plastic Floor Coating is resistant to abrasion, scratching, most solvents, weak acids and alkalis. Rustins Plastic Floor Coating can be used on wood, cork, MDF, chipboard, laminates, slate and stone.
Rustins Plastic Floor Coating is quick drying and a second or third coat can be reapplied after approximately 1 - 1 1/2 hours. The floor in question can receive light foot traffic in just two-three hours after the last coat has been applied.
Please see the INFO tab above for full Preparation and Application advice.
Recoatable 2-3 hours
Coverage 12-15 SqMtrs per Litre per Coat
Clean equipment with White Spirits
Rustins Clear Plastic Floor Coating 4 litre Reviews
| UK Mainland|
2-3 Days 1
FREE - Orders £40+
| DPD Express||Next Working Day 1||£4.95|
£2.50 - Orders £40+
FREE - Orders £90+
| DPD Pre 12||Mon-Fri Pre 12||£9.95|
| DPD Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| DPD Express||2 Day||£14.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| DPD Express||2 Day||£19.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
| DPD Express||2 Day||£19.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Rustins Clear Plastic Floor Coating 4 litre:
Preparation: Ensure the floor is clean, dry and free from any wax polish. Remove any previous wax finishes thoroughly with grade 3 wire wool and white spirits. Fill any small holes with a good quality filler and sand the floor back to bare wood. Larger cracks, joints or imperfections can be filled using Jenkins Joint Filler gel mixed with your sawdust.
Colour change: A few drops of water on the sanded floor will give an indication as to the final floor colour once Rustins Plastic Floor Coating has been applied. If a different colour is required, stain the floor using Rustins Wood Dye which is available in a wide range of colours.
Application: Apply with a Mako Flooring Brush or a large good quality hand brush such as the Mako Acer Pro brush.
Suitable for: Wooden, Cork and Laminate flooring
4 Litre Pack Contains: 4 Litre Plastic Floor Coating, 250ml Hardener, 500ml Thinners/Brush Cleaner.
Brush cleaning: Clean brushes immediately after use with the Rustins Thinners provided in the pack.
Drying Time: 1 - 2 hours between coats
Coverage: 12-14 SqMtrs/ litre/ coat (4 litre pack = 2 coats on 24-28 SqMtr floor)
Finishes available: Gloss or Satin
Available in: 4 litres