Rest Express
Rest Express
01285 831668

Mon - Fri 8am - 5pm

Rest Express
Rest Express
Rest Express

Ronseal Diamond Hard Floor Varnish Coloured 2.5 litre

Ronseal Diamond Hard Floor Varnish Coloured 2.5 litre
Ronseal Diamond Hard Floor Varnish 2.5LRonseal Diamond Hard Floor Varnished Floor

Colour Guide:

colour swatch


Please select colour

45% OFF Mako Pro Brush
Sets with this product!


Coverage Calculator   v
Coverage Calculator   ^

Enter area to be covered


Coats: 3   Amount Req.


Ronseal Diamond Hard Floor Varnish 2.5 litre colours are an advanced waterborne formulation that provides an exceptionally hard wearing and long lasting Satin floor finish.

Its advanced formula is designed to give unbeatable protection from scratches, scuffs, knocks and household chemicals.

Ronseal Diamond Hard Floor Varnish is fast drying, low odour and will leave your floor with a beautifully smooth, rich and long lasting protection.

Where can it be used? Diamond Hard Floor Varnish is suitable for use on most hardwoods and softwoods, plus chipboard and hardboards. Particularly high foot traffic areas including Kitchens and Bathrooms. It is NOT suitable for use on laminate floors.

What sort of finish? Diamond Hard Floor Varnish is available in a range of Satin natural rich wood colours, each adding a new depth of colour whilst still allowing the natural grain of the wood to show through.

How many coats? On bare wood Ronseal recommend 3 coats to ensure maximum protection and a long lasting finish.

Above are two short VIDEO guides showing How to prepare and wooden floor and How to varnish a wooden floor.
Although the 'How to Varnish' video shows the Ronseal Perfect Finish Floor Varnish, the same excellent results can be achieved with the Diamond Hard Floor Varnish without the Perfect Finish applicator.

Also available: Ronseal Diamond Hard Floor Varnish Clear Satin and Gloss 5 litre.

Please see our Ronseal section for a full range of Ronseal products stocked, including Diamond Hard Floor Paint and Perfect Finish Diamond Hard Floor Varnish, plus our Flooring section for alternative products from Fiddes and Liberon.

Recoatable 2-3 hours IconRecoatable 2-3 hours

Brush or Roller applied IconBrush or Roller applied

Coverage upto 20 SqMtrs per Litre per Coat IconCoverage upto 20 SqMtrs per Litre per Coat

3 coats required Icon3 coats required

Clean equipment with Water IconClean equipment with Water

Ronseal Diamond Hard Floor Varnish Coloured 2.5 litre Reviews

Ronseal Diamond Hard Floor Varnish Coloured 2.5 litre Video

Delivery Information

 UK Mainland
 Standard Delivery

2-3 Days 1

FREE - Orders £40+
 DPD ExpressNext Working Day 1
£2.50 - Orders £40+
FREE - Orders £90+
 DPD Pre 12Mon-Fri Pre 12£9.95
 DPD Saturday Saturday 9:00-17:00 £9.95

 Scottish Highlands, Islands, Isle of Wight, Isle of Man

 Standard Delivery 3-4 Days £6.95
 DPD Express2 Day£14.95
 Northern Ireland
 Standard Delivery3-4 Days £9.95
 DPD Express2 Day£19.95
 Republic of Ireland and Channel Islands
 Standard Delivery 3-4 Days£14.95
 DPD Express2 Day£19.95

1 Order online before 5pm Monday - Friday for same day dispatch.

Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire

Offshore Postcodes:
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands

Ronseal Diamond Hard Floor Varnish 2.5L

Bare timber floor; After thoroughly sanding the floor, fill any imperfections with Ronseal Multi Purpose or High Performance Wood Filler, vacuum and finally wipe over the floor with a cloth and White Spirits to remove any traces of dust.
Varnished floor; Thoroughly sand to bare timber, completely removing any previous finish to leave a smooth bare wood surface. Vacuum and wipe over with White Spirits as above.

Application: Ronseal Diamond Hard Floor Varnish can be applied with a quality 401X Pro brush, floor brush, roller or pad. For best results 3 coats should be applied, allowing 2 hours between coats. Before applying the final coat lightly sand the floor with P240 grade abrasive, do not use wire wool, and wipe over with a damp cloth. The finished floor will be ready to walk on after just 8 hours, but leave the floor 72 hours before heavy foot traffic. Brushes and rollers can be cleaned with water and detergent.

Drying Time: 2 hours between coats

Coverage: 16-20SqMtrs/ Litre/ Coat.
Therefore depending on the absorbency of the wood 2.5Ltrs should be sufficient for 3 coats on a 15 SqMtr Floor.

Available in:

  • 2.5 litres: Antique Pine, Light Oak, Medium Oak, Dark Oak, Rich Mahogany, Walnut and White Ash.
  • 5 litres: Clear - Satin or Gloss

Back to top