Polyvine Heavy Duty Wood Varnish is an ultra tough, fast drying, clear acrylic varnish for interior surfaces requiring the toughest of finishes. It is suitable for use on tabletops, work surfaces, kitchen cabinets, doors and other interior joinery.
- Crystal clear finish
- Fast Drying - only 30 - 60 minutes!
- Food and Child Safe
- Heat and Water resistant
- Stain and Chemical resistant
- Ultra hard and Durable protection
Available in: Clear Satin
Please see our INFO tab above for full Preparation and Application advice.
Please also see our full range of Polyvine products stocked and our Glazes and Varnishes Product Section for alternative varnishes.
Coverage upto 20 SqMtrs per Litre per Coat
2-3 coats required
Clean equipment with Water
Polyvine Heavy Duty Wood Varnish Satin 1 litre Reviews
| UK Mainland|
2-3 Days 1
FREE - Orders over £40
| Express Delivery||Next Working Day 1||£4.95|
£2.50 - Orders over £40
| Premium AM||Mon-Fri Pre 12|
Mon-Fri Pre 10.30AM
| Premium Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Polyvine Heavy Duty Wood Varnish:
Preparation: The surface should be clean, dry and free from any dust, dirt, oil or contamination. Remove any dust with a tack cloth, Liberon Tack Cloths are ideal for this.
Application: After ensuring the product is well mixed, apply thinly 2 - 3 coats with a good quality brush such as Mako 4* Brush.
On new wood the first coat should be diluted 10% with water, allowed to dry then lightly sanded before applying 1 or 2 further coats.
Always test for compatibility before application.