Peelaway Marine is formulated to remove multiple layers of marine antifouling, paints and varnishes from GRP, wood, metal and concrete all in one application.
It is a patented water based environmentally safer system, which contains the removed antifoul or paint with no dangerous fumes or toxic particles.
- Removes multiple layers in one application
- NO airborne toxic particles associated with scraping or sanding
- Less agressive on the hull compared to blasting
All Peelaway Marine packs contain: Instructions, Application Tool and sufficient Peelaway Marine blankets.
The VIDEO above shows Peel Away Marine being used.
We would always recommend trialing with Peelaway Marine Twin Tester Pots, enabling you to test the thickness required and how long to leave it on for your particular project.
Coverage: The amount of Peelaway Marine needed for a project depends on type and thickness of the antifoul or paint. As a rule of thumb, 1kg of Peelaway Marine covers 2-4 SqMtrs at 1-2mm thickness. Generally 10kg will cover approximately 20 SqMtrs.
Also available Peelaway Marine Spare Blankets and for hand protection without losing dexterity please also see our Nitrile Disposable Gloves.
Peelaway Marine Antifoul and Paint Removal System Reviews
Peelaway Marine Antifoul and Paint Removal System Video
| UK Mainland|
2-3 Days 1
FREE - Orders over £40
| Express Delivery||Next Working Day 1||£4.95|
2.50 - Orders over £40
| Premium AM||Mon-Fri Pre 12|
Mon-Fri Pre 10.30AM
| Premium Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Peelaway Marine Instructions:
Preparation: - Clean and prepare the work area by removing any built up accumulations of fouling or blistered foul coating. Cover with polythene sheet any areas not to be stripped.
Apply a small test patch of Peelaway Marine, this will enable you to determine how thick to apply and how long it will need to be left on for. This stage is important as it is very difficult to know the type and build up of antifouling before being removed.
Uneven surfaces - Brush, Trowel or airless Spray (spray dilution up to 20% water) thinly into the surface before applying a second coat to the final tested thickness. Cover with the Peelaway Marine Blankets included, gently pressing onto the paste.
- Brush, Trowel or airless Spray (spray dilution up to 20% water) to the thickness required. Cover with the Peelaway Marine Blankets included, gently pressing onto the paste.
Peelaway will work between 30 minutes and 24-48 hours depending on the type and thickness of antifoul or paint to be removed.
Removal: - Slide a wide bladed scraper or spatula under the paste, trying to keep the paste, paint and cover together as much as possible. Where local boatyard conditions allow, pressure washing may also remove any residue before washing off the stripped surface and allowing to dry thoroughly.
Disposal: - Collect all removed paint as paste residue and dispose in accordance with local authority regulations for this type of waste.
For most applications Peelaway Marine will work between 6 - 24 hours and tests have proved is safe to use on GRP/ Gel Coat for upto 48 hours. Barrettine accepts no responsibility for unsatistfactory results or damage caused by the use of Peelaway Marine.
Please first do a test patch.