Osmo Polyx Oil Raw - The original Hard Wax Oil with a special pigment for a raw appearance.
Osmo Polyx Oil Raw is an addition to the Tints range of the market-leading Osmo Polyx Oil Original. It's transparent hint of white colour is designed to minimise the darkening of the wood, leaving a natural raw appearance, whilst protecting with a flexible, micro porous lightly waxed finish.
Also available: Osmo Polyx Oil Tints 5ml sample sachet, 125ml and 750ml.
All Colour Charts: Interior Wood Oils.
Osmo Polyx Oil Raw is very durable, and resistant to water and dirt, and is designed not to peel, crack or flake. Polyx Oil Raw is recommended for all natural wooden floors, included new or reclaimed timber, parquet and block floors, it is also suitable for interior joinery and furniture leaving a lightly waxed finish.
Please see the INFO tab above for full Preparation and Application advice.
Please also see our Osmo section for the full range of Osmo products stocked, including the Original Osmo Polyx Oil and the quick drying Osmo Polyx Oil Rapid. For alternative products including Fiddes Hard Wax Oil please see our Floor Finishes section.
Recoatable 8 hours
Brush or Roller applied
Coverage upto 30 SqMtrs per Litre per Coat
2 coats required
Clean equipment with White Spirits
Osmo Polyx Oil Raw 3044 Matt Reviews
| UK Mainland|
2-3 Days 1
FREE - Orders £40+
| DPD Express||Next Working Day 1||£4.95|
£2.50 - Orders £40+
FREE - Orders £90+
| DPD Pre 12||Mon-Fri Pre 12||£9.95|
| DPD Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| DPD Express||2 Day||£14.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| DPD Express||2 Day||£19.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
| DPD Express||2 Day||£19.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Osmo Polyx Oil Raw 3044 Matt:
Preparation: The wooden surface must be clean and dry before applying Osmo Polyx Oil Raw. On timber floors remove any previous varnish by sanding with P120-P150 grit, or on internal joinery or furniture sand with P180-P240 grit abrasive; fill any small imperfections with a good quality filler. Larger cracks can be filled by mixing the sawdust with a Joint Gel filler, before vacuuming to remove all dust.
Application: Test in an inconspicuous area to confirm suitability and the final colour. Apply the first coat of Osmo Polyx Raw hard wax oil thinly and evenly in the direction of the grain with a good quality brush, such as Mako 5* Pro Woodcare Brush, or for larger areas Osmo 220mm Floor Brush or Microfibre Roller.
The second/ final coat could either be clear Osmo Polyx Oil Original applied as per the first or for a more intense colour a second coat of Polyx Oil Raw (total number of two coats to be applied).
Cleaning: Osmo Wash and Care should be used for general cleaning of Polyx treated floors. It is a water soluble concentrate designed specifically for cleaning oiled and waxed floors, without drying out the wood or removing the finish.
If a higher sheen level is required or the floor needs refreshing or reviving after hard use, Osmo Liquid Wax Cleaner is also available.
Finish available: Natural Matt
Osmo Polyx Oil Raw's pigment works particularly well with Oak and other light coloured timbers such Ash or Spruce, drying without leaving the 'wet-look' appearance of the original Polyx Oil and other oil finishes.
Coverage: upto 24-30 SqMtrs/ litre per coat
Drying Time: 8-10 hours
Clean equipment with: White Sprits
Storage: up to 5 years when protected from frost
Available in: 5ml sample, 750ml and 2.5 litres