Liberon Spirit Wood Dye 5 litre is a traditional ethanol based dye which penetrates deep into the wood and can be mixed together to obtain intermediate shades.
Liberon Spirit Wood Dye is:
- Recommended for use on hardwood and furniture restoration.
- Easy to apply especially on previously finished woods.
- Ideal for colouring mahogany and oak.
- Penetrates deep into the wood.
- All colours are intermixable.
- Suitable for tinting French Polish.
The above Info tab gives full Preparation and Application advice.
Also available: 250ml and 1 litre.
Please also see our Wood Stains and Dyes section for our full range of alternative stains, including Fiddes, Liberon and Rustins spirit dyes.
Recoatable 4-6 hours
Brush or Cloth applied
Coverage 10-12 SqMtrs per Litre per Coat
1-2 coats required
Clean equipment with White Spirits
Liberon Spirit Wood Dye 5 litre Reviews
| UK Mainland|
2-3 Days 1
FREE - Orders £40+
| DPD Express||Next Working Day 1||£4.95|
£2.50 - Orders £40+
FREE - Orders £90+
| DPD Pre 12||Mon-Fri Pre 12||£9.95|
| DPD Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| DPD Express||2 Day||£14.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| DPD Express||2 Day||£19.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
| DPD Express||2 Day||£19.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Liberon Spirit Wood Dye 5 Litre.
Previously Treated Wood
- All existing finishes must be completely removed.
- Sand thoroughly back to bare wood and remove any sanding dust.
- Remove old wax finishes with a Wax and Polish Remover.
- Varnishes can be removed with Liberon Wood Stripper.
Application: Shake well before use. Apply liberally with a brush or clean cotton cloth, remove excess dye immediately with a clean cotton cloth, working with the grain wherever possible. Ensure sure you have sufficient dye to finish the work. If more than one tin is required, mix the contents together in a clean container to ensure uniform colour.
Once dry, Liberon Spirit Wood Dye can be sealed with Liberon Spirit Sanding Sealer and, if required, then finished with Liberon water-based wood Varnish or Dulux Diamond Glaze, Wax, Oil or Polish.
Please note, always test product on a spare or inconspicuous area for compatibility and end result. The colour bar may not be a true representation of the actual colour.
Drying time: Minimum 6 hours.
Coverage: 5 Litre - 50 - 60 SQMtrs.
Cleaning Equipment: Methylated Spirits.
Coats: For stronger colour apply a second coat after 4 hours.
Please see Liberon Product Selection Guide for Furniture Care, for help on selecting the best Liberon product for your project.