Liberon Spirit Wood Dye 250ml is a new ethanol based formula that makes application easy, it's quick drying and penetrates deep into the wood, making it effective on hardwoods and also stripped wood.
Liberon Spirit Wood Dye is:
- Recommended for use on hardwood, good for Softwood.
- Suitable for use on new and reclaimed timbers.
- All colours are intermixable.
- Suitable for tinting French Polish.
The above Info tab gives full Preparation and Application advice.
Also available: 1 litre and 5 litre.
Please also see our Wood Stains and Dyes section for our full range of alternative stains, including Fiddes, Liberon and Rustins spirit dyes.
Recoatable 4-6 hours
Brush or Cloth applied
Coverage 10-12 SqMtrs per Litre per Coat
1-2 coats required
Clean equipment with White Spirits
Liberon Spirit Wood Dye 250ml Reviews
| UK Mainland|
2-3 Days 1
FREE - Orders £40+
| DPD Express||Next Working Day 1||£4.95|
£2.50 - Orders £40+
FREE - Orders £90+
| DPD Pre 12||Mon-Fri Pre 12||£9.95|
| DPD Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| DPD Express||2 Day||£14.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| DPD Express||2 Day||£19.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
| DPD Express||2 Day||£19.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Liberon Spirit Wood Dye 250ml
Ensure the surface to be dyed is clean, dry and free from any dust, dirt or any other surfaces contaminants.
Fill any imperfections with Liberon Wood Stopping and sand to flatten.Wear gloves when applying the wood dye, to avoid staining skin.
All existing finishes must be completely removed.
Remove old wax finishes with a Wax and Polish Remover and oo grade Liberon steel wool.
Varnishes can be removed with Liberon Wood Stripper and 1 grade Liberon steel wool.
Sand thoroughly back to bare wood and remove any sanding dust.
Shake well before use. Apply liberally with a brush or clean cotton cloth.
Remove excess dye immediately with a clean cotton cloth, working with the grain wherever possible.
Ensure you have sufficient dye to finish the work. If more than one tin is required, mix the contents together in a clean container to ensure uniform colour.
Once dry, Liberon Spirit Wood Dye can be sealed with Liberon Spirit Sanding Sealer and a wax polish, such as Liberon Black Bison Wax or, if required, finished with Liberon water-based wood Varnish, Dulux Diamond Glaze, or a Shellac Polish, such as Liberon Special Pale French Polish.
Please note, always test the product on a spare or inconspicuous area for compatibility and colour.
The colour bar may not be a true representation of the actual colour, as results may vary depending on the type and age of the timber.
Drying time: Minimum 6 hours.
Coverage: 250ML - 2.5 - 3 SQMtrs.
Cleaning Equipment: White Spirit.
Coats: For stronger colour apply a second coat after 4 hours.
Please see Liberon Product Selection Guide for Furniture Care, for help on selecting the best Liberon product for your project.