Liberon Hard Wax Oil 2.5 litre has been produced using the latest waterborne technology.
It's unique Low VOC blend of premium oils and waxes, will leave your wooden furniture, internal joinery or flooring with a superior protection, natural feel and a natural lightly waxed finish.
Liberon Hard Wax Oil leaves a lightly waxed finish on the surface of the wood, maintaining the natural look and feel of the wood whilst forming a protective barrier against everyday wear and tear including water and dirt penetration.
Using the latest waterborne technology, Liberon Hard Wax Oil can be used on bare wood and over previously oiled finishes.
It is also particularly suitable for use in bathrooms and kitchens, its low odour makes it ideal for use in the family home.
Please see the INFO tab above for Preparation and Application advice.
Also available: Liberon 1 litre Satin or Matt
Please see our Floor Finishes section for a full range of alternative floor finishing products including Osmo Polyx Oil and Fiddes Hard Wax Oil.
Recoatable 8 hours
Brush or Roller applied
Coverage 12-15 SqMtrs per Litre per Coat
2 coats required
Clean equipment with Water
Liberon Hard Wax Oil 2.5 litre Reviews
| UK Mainland|
2-3 Days 1
FREE - Orders £40+
| DPD Express||Next Working Day 1||£4.95|
£2.50 - Orders £40+
FREE - Orders £90+
| DPD Pre 12||Mon-Fri Pre 12||£9.95|
| DPD Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| DPD Express||2 Day||£14.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| DPD Express||2 Day||£19.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
| DPD Express||2 Day||£19.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Liberon Hard Wax Oil - 2.5 litre:
Bare or Previously Oiled wood: Clean and lightly sand with a medium grade abrasive and remove all dust.
Waxed, Painted or Varnished wood: Remove the previous finish with either a Wax & Polish Remover or a good paint stripper such as Liberon Fine Wood Stripper or Nitromors. Sand to the bare wood and remove all dust.
Application: Apply the first coat thinly with a good brush such as the Mako Woodcare 5* or by roller. Allow to dry for 8 hours (overnight), lightly sand with P240 grit sandpaper then apply a second coat as per the first. Allow 24 hours for the final coat to dry before heavier use.
Cleaning: The treated surface can be cleaned using a mild detergent or ideally with a surface cleaner from Fiddes or Osmo for hard wax oil finishes.
Coverage: 14 SqMtrs/ litre/coat
Application: Brush or Roller
Drying Time: 8 hours between coats, 24 hours final
Low VOC content: 24g/L VOC
Finish: Clear Satin or Clear Matt
Clean Tools: Water
Available in: 1 litre or 2.5 litre