Hammerite 5L Direct to Rust Smooth Metal Paints have been specially formulated to form a tough and attractive barrier which will protect and resist knocks and scrapes whilst maintaining a beautiful finish for longer than standard metal paints.
Due to Hammerite's unique 3 in 1 formulation, Hammerite Direct to Rust Metal Paint can be painted directly onto a rusty surface without the need for using a separate primer and undercoat.
Hammerite is available in attractive Smooth or Hammered finishes, offering long lasting protection for up to 8 years! It is corrosion resistant, containing pigments that give an additional barrier of protection by reacting with the atmosphere.
Hammerite Metal Paints are touch dry in 2 hours and recoatable in 4 hours, making them suitable for use on a wide range of household and commercial metal surfaces including Railings, Gates, Garden Furniture, Bedsteads and much more!
For more information please also see Hammerite Special Metals Primer and Hammerite No.1 Rust Beater.
Also available a range of Garden Paints by Ronseal and Cuprinol.
Recoatable 4-6 hours
Brush, Roller or Spray applied
Coverage 4-5 SqMtrs per Litre per Coat
1-2 coats required
Hammerite Smooth 5 litre Reviews
| UK Mainland|
2-3 Days 1
FREE - Orders over £40
| Express Delivery||Next Working Day 1||£4.95|
£2.50 - Orders over £40
| Premium AM||Mon-Fri Pre 12|
Mon-Fri Pre 10.30AM
| Premium Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Hammerite Smooth - 5L:
Preparation: Remove all loose rust and flaking paint with a wire brush. Then wash the surface down with a mild detergent solution removing any dirt, dust or grease. Rinse with clean water and allow to dry.
Pre-application on a painted surface: Paint a small test area with Hammerite and leave for 1 hour. If there is no reaction you are clear to proceed and paint the rest of the surface. If there is a reaction, remove all existing paint prior to painting with Hammerite.
On bare galvanised metal surfaces including aluminium, copper, brass, chrome and stainless steel, use Hammerite Special Metals Primer prior to painting with Hammerite Metal Paint.
Application: Lightly stir, not too vigorously, before application in an ideal temperature range of 8 - 25DegC. Hammerite can be brushed, sprayed or rollered. Previously painted surface may only require a single coat, bare or rusty surfaces will require 2 coats.
Cleaning: Remove as much paint from your brushes as possible and clean with Hammerite Brush Cleaner and Thinners.
Coverage: 5 SqMtrs/ litre/ coat