Dulux Diamond Glaze Varnish Gloss is a single part water-based interior varnish that gives unbeatable protection for high wear surfaces.
Dulux Diamond Glaze Varnish is up to 10x tougher than conventional varnishes and is particularly suitable for floors, as well as other internal joinery including doors, skirting and furniture.
Being water-based, Dulux Diamond Glaze is quicker drying than traditional solvent based alternatives, it is easy to apply and there is less waste compared to two part varnishes or lacquers.
Also available: Dulux Diamond Glaze Varnish Satin.
Please also see our Glazes and Varnishes section for our full range of professional varnishes from Bona, Fiddes, Ronseal, Rustins and more..
Recoatable 3-4 hours
Brush or Roller applied
Coverage upto 20 SqMtrs per Litre per Coat
2-3 coats required
Clean equipment with Water
Dulux Trade Diamond Glaze Varnish Gloss Reviews
| UK Mainland|
2-3 Days 1
FREE - Orders over £40
| Express Delivery||Next Working Day 1||£4.95|
£2.50 - Orders over £40
| Premium AM||Mon-Fri Pre 12|
Mon-Fri Pre 10.30AM
| Premium Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Dulux Diamond Glaze Varnish - Gloss:
Application: Ensure the surface to be treated is clean and dry, any previous varnish should be lightly sanded to provide a key and for bare or new wood first apply a sealing coat of Diamond Glaze.
Thoroughly stir Dulux Diamond Glaze before use, apply evenly and consistently along the grain with a good brush such as the Mako 5* Pro or Floor Brush or with a short pile Mohair Roller. Allow 2+ hours and lightly sand with a fine abrasive such as Mirka Hiomant P240 with the grain between coats.
Light foot traffic is possible after 24 hours, although allow 7 days before heavier use or covering with rugs or carpets.
| Drying Time: || 2-4 hours recoatable, 24 hours light foot traffic |
| Coverage: ||Bare wood 12-20 SqMtrs/ litre/ coat|
Previously coated wood 20-25 SqMtrs/ litre/ coat
| Application: || Brush or Mohair Roller |
| Finish: || Clear Satin or Clear Gloss |
| Available in: || 1 litre, 2.5 litre or 5 litres |
| Coats: || 2-3 coats required |
| Clean equipment: || With water |