Rustins Floor Oil 5 litre is a unique blend of natural oils and resins designed to protect and enhance the natural beauty of your wooden floor.
It is easy to apply and is suitable for all types of wooden floors.
Rustins Floor Oil is highly durable and water resistant, it is designed to soak into the wood bringing out its natural colour and leaving a protective seal.
Colour change: A few drops of water on the sanded floor will give an indication as to the final floor colour once Rustins Floor Oil has been applied.
If a different colour is required, stain the floor using Rustins Wood Dye which is available in a wide range of colours.
Available in: 5 litres
Recoatable 8 hours
Brush or Roller applied
Coverage 10-12 SqMtrs per Litre per Coat
3 coats required
Clean equipment with White Spirits
Rustins Floor Oil 5 litre Reviews
| UK Mainland|
2-3 Days 1
FREE - Orders over £40
| Express Delivery||Next Working Day 1||£4.95|
£2.50 - Orders over £40
| Premium AM||Mon-Fri Pre 12|
Mon-Fri Pre 10.30AM
| Premium Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Rustins Floor Oil
Preparation: Ensure the floor is clean, dry and free from any wax polish.
Remove any previous wax finishes thoroughly with grade 3 wire wool and white spirits.
Fill any small holes with a good quality filler and sand the floor back to bare wood. Larger cracks or imperfections can be filled using Jenkins Joint Filler gel mixed with your sawdust.
Application: Apply liberally using a good quality brush such as Mako Woodcare Brush, or a Microfibre or sponge Roller.
After about 5 minutes wipe off any excess and allow to soak in and dry for 4-8 hours before recoating. Three coats will usually be required.
Coverage: 10-12 SqMtrs/ litre/ coat
Clean equipment with: White Sprits