Osmo Wash and Care - The Polyx Oil surface cleaner is a specifically designed everyday cleaner for use on Polyx Oil and other hard wax oil protected surfaces.
It is a water soluble cleaning concentrate that contains soaps based on natural oils, so your wood won't dry out after cleaning, leaving a refreshed and anti-slip surface.
Recommended for: All waxed, oiled and hard wax oiled floors and surfaces, plus equally good for lacquered, cork, laminate, PVC and stone floors.
Please see the VIDEO clips above showing how to Clean & Maintain and Repair & Renovate a hard wax oil protected floor.
The INFO tab above gives full Preparation and Application advice.
Please also see our Osmo section for the full range of Osmo products stocked, including the Original Polyx Oil, coloured version Osmo Polyx Oil Tints and the quick drying Osmo Polyx Oil Rapid.
For alternative floor cleaning products please see Fiddes Floor Reviver Kit and Floor Surface Cleaner.
Osmo Wash and Care 8016 Reviews
Osmo Wash and Care 8016 Video
| UK Mainland|
2-3 Days 1
FREE - Orders over £40
| Express Delivery||Next Working Day 1||£4.95|
£2.50 - Orders over £40
| Premium AM||Mon-Fri Pre 12|
Mon-Fri Pre 10.30AM
| Premium Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Osmo Wash and Care 8016:
Manually - Use approximately 1 capfull of Wash and Care per 1 litre of clean water and damp mop (not too wet) the floor and allow to dry.
Mechanically - Dilute to the same 1 capfull per I litre of water and spray onto the surface, followed by cleaning with a single disc machine.
From time to time we recommend using Osmo Liquid Wax Cleaner after using Osmo Wash and Care, this will refresh the surface finish as it contains natural waxes.
In commercial and heavily used areas, re-oiling may be required. First clean thoroughly with Osmo Wash and Care at a stronger mix (up to 1:1); allow to completely dry followed by a single thin coat of Osmo Polyx Oil.
Available in: 1 litre and 5 litres