Rest Express
Rest Express
01285 831668

Mon - Fri 8am - 5pm

Rest Express
Rest Express
Rest Express
Rest Express Blog

Osmo UV Protection Oil Extra 420 Clear

Osmo UV Protection Oil Extra 420 Clear
Osmo UV Protection Oil 420 ClearOsmo UV protection Oil on House Exterior Cladding

Colour Guide:

colour swatch


Best Price Guaranteed
Please select size

50% OFF Mako Woodcare
Brush with this product!


Coverage Calculator   v
Coverage Calculator   ^

Enter area to be covered


Coats: 2   Amount Req.


Osmo UV Protection Oil 420 Extra - The original exterior UV Protection Oil.

Osmo UV Protection Oil 420 contains special clear ingredients which stop the suns rays from ageing and greying your wood, without losing its natural beauty, colour or character. Based on natural oils, UV Protection Oil 420 Clear will leave a satin-matt finish that is breathable so does not peel, flake or blister.

Also available: Osmo UV Protection Oil Tints 425 Oak, 428 Cedar and 429 Natural.

All Colour Charts: Exterior Wood Oil.

Osmo UV Protection Oil Extra contains additional active ingredients that significantly extend the protection period, up to 12 times, whether used as a stand alone finish or over a stained finish when compared to other UV Oils.

Please see the INFO tab above for Preparation, Coverage and Application advice.

Please also see our Osmo section for the full range of Osmo products stocked including the Osmo Polyx Oil and Anti-slip Exterior Finishes section for alternative products including Fiddes High Build Wood Oil and Liberon Exterior Wood Protector.

Drying Time upto 12 hours IconDrying Time upto 12 hours

Brush applied IconBrush applied

Coverage upto 20 SqMtrs per Litre per Coat IconCoverage upto 20 SqMtrs per Litre per Coat

2 coats required Icon2 coats required

Clean equipment with White Spirits IconClean equipment with White Spirits

Osmo UV Protection Oil Extra 420 Clear Reviews

Delivery Information

 UK Mainland
 Standard Delivery

2-3 Days 1

FREE - Orders £40+
 DPD ExpressNext Working Day 1
£2.50 - Orders £40+
FREE - Orders £90+
 DPD Pre 12Mon-Fri Pre 12£9.95
 DPD Saturday Saturday 9:00-17:00 £9.95

 Scottish Highlands, Islands, Isle of Wight, Isle of Man

 Standard Delivery 3-4 Days £6.95
 DPD Express2 Day£14.95
 Northern Ireland
 Standard Delivery3-4 Days £9.95
 DPD Express2 Day£19.95
 Republic of Ireland and Channel Islands
 Standard Delivery 3-4 Days£14.95
 DPD Express2 Day£19.95

1 Order online before 5pm Monday - Friday for same day dispatch.

Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire

Offshore Postcodes:
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands

Osmo UV Protection Oil 420 Clear:

It is a basecoat and top coat all in one that protects your wood against mould algae and fungal attack.

Preparation: The wooden surface must be clean and dry before applying Osmo UV Protection Oil Extra. Thoroughly remove any previous varnish by sanding with P120 grit abrasives.

Application: Test in an inconspicuous area to confirm suitability and the final colour. Apply Osmo UV Protection Oil Extra evenly with a good quality brush such as Mako 5* Pro Woodcare Brush or for larger areas Osmo 220mm Floor Brush. On bare timber two coats will be required, apply a second coat after allowing to dry overnight or 10-12 hours as per the first.

Areas of use: External joinery including windows and doors, cladding, gates, garden furniture and much more.

Can it be used on Green Oak? A moisture test must be performed before using Osmo UV Protection Oil on Green Oak. Because the moisture in Green Oak and oils do not mix, the moisture content must be below 20% before treating with UV Protection Oil.

Finish available: Clear Satin-matt, Oak Satin-matt, Cedar Satin-matt, Natural Satin-matt.

The Oak and Cedar versions of UV Protection Oil produces a slightly darker finish than the standard Clear, enhancing the beautiful colour of the wood and giving longer UV protection, whilst the Natural is specifically for use on light coloured woods.

Coverage: upto 20 SqMtrs/ litre per coat

Number of coats: 2 coats on bare wood, 1 when renovating a clean dry surface

Drying Time: 10-12 hours

Clean equipment with: White Sprits

Storage: up to 5 years when protected from frost

Available in: 5ml sample, 750ml and 2.5 litres

Back to top