Osmo Wood Wax Finish Extra Thin 1101 is a microporous, transparent, interior hard wax oil finish, which is particularly suitable for exotic hardwoods including teak, mahogany, cedar, merbau, wenge and many more.
Because of the dense nature of exotic woods, the thinner, deeper penetrating Osmo Wood Wax 1101 is the correct product to use and will not lay soft on the surface as standard hard wax oil is likely to.
Osmo Wood Wax Finish Extra Thin will bring out the natural beauty of the wood, it is hardwearing, durable and resistant to water and dirt.
The INFO tab above includes helpful preparation and application advice.
Available in: 125ml tester, 750ml and 2.5 litres
Please also see our Osmo section for the full range of Osmo products stocked, including the Osmo Wood Protector and Polyx Oil ranges or our Floor Finishes section for a full range of alternative floor protection products.
Brush or Cloth applied
Coverage 20 SqMtrs per Litre per Coat
2 coats required
Clean equipment with White Spirits
Osmo Extra Thin Wood Wax Finish Clear 1101 Reviews
| UK Mainland|
2-3 Days 1
| Express Delivery||Next Working Day 1||£4.95|
FREE - Orders over £60
| Premium AM||Mon-Fri Pre 12|
Mon-Fri Pre 10.30AM
| Premium Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Osmo Extra Thin Woos Wax Finish 1101:
Preparation: The wooden surface must be clean and dry and have a moisture content less than 20%. Osmo Wood Wax Finish extra thin should be applied to bare wood, lightly sand any old microporous oil finish or remove any previous varnish by using a paint stripper and sanding.
Application: Test in an inconspicuous area to confirm suitability and the final colour. Apply the first coat of Osmo Wood Wax Finish extra thin evenly along the wood grain with a lint free cloth or suitable brush such as the Mako Woodcare Pro Brush. Allow to dry for 30 minutes, wipe off any excess, then apply a second coat as per the first.
Coverage: 24 SqMtrs/ litre per coat
Number of coats: 2
Drying Time: 12 hours
Storage: up to 5 years when protected from frost
It is suitable for use on all interior woodwork including floors, doors and panelling, whether in a kitchen, bathroom, bedroom or living room.