Mylands High Solid Waterbased Self-Crosslinking Lacquer (HS SCL Lacquer) can be used as a coat-on-coat system or over Mylands HS SCL Sealer Basecoat and dries to a long lasting finish with excellent transparency, flow and surface feel.
Mylands HS SCL lacquers are designed to meet the FIRA 6250 Heavy/Severe Use Standard.
Mylands HS SCL Lacquer is a premium waterbased lacquer on par with many standard Acid Catalyst and Pre Catalyst Lacquers.
Tip: This product can be brush applied equally as well as being sprayed, very popular with kitchen manufacturers.
Please see our Glazes and Varnishes section for alternative products or our Mylands section for the full product range
Brush or Spray applied
Coverage 6-8 SqMtrs per Litre per Coat
Clean equipment with Water
Mylands Water Based HS SCL Lacquer 5 litre Reviews
| UK Mainland|
2-3 Days 1
FREE - Orders over £40
| Express Delivery||Next Working Day 1||£4.95|
2.50 - Orders over £40
| Premium AM||Mon-Fri Pre 12|
Mon-Fri Pre 10.30AM
| Premium Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Mylands Water Based HS SCL Lacquer 5 lirtre:
Standard products are for application by Conventional, HVLP or Air assisted Airless spray methods. Normally, two or more coats of the same material are applied, the exception being the full matt lacquer where we recommend a basecoat of a higher sheen material is used to maintain clarity of finish.
Touch dry in 15-20 minutes
Sanding/re-coating between 60 - 90 minutes.
These times may be reduced by forced drying. At temperatures below 15°C and high humidity, drying times will be extended and film formation endangered.
Coverage: 6 - 8 Square Mitre per 1 litre.