Liberon Wax and Polish Remover is easy to use and gets rid of everyday grime!
It will remove smoke stains, dirt and old wax and can be used on all interior wood such as beams, dado rails, banisters or doors, without harming the original finish!
Liberon Wax and Polish Remover should not raise the grain or lift veneers and can be used on the most delicate of surfaces. Can also be used to remove a build up of layers of wax, which is making a surface look misty.
Recommended for use on French polishes, varnish, lacquer and oil finishes.
- Interior use only
- Coverage 250ml - 2-3 Sq.Mtrs
- Apply with steel wool
- 6 hours minimum drying time
- Clean tools with white spirit
Please see the INFO tab above for full Preparation and Application instructions.
The short Liberon VIDEO below giving valuable hints and tips on wood preparation - the key to a professional finish
1-2 coats required
Clean equipment with White Spirits
Coverage 8-10 SqMtrs per Litre per Coat
Liberon Wax and Polish Remover (Libnet) Reviews
Liberon Wax and Polish Remover (Libnet) Video
| UK Mainland|
2-3 Days 1
FREE - Orders over £40
| Express Delivery||Next Working Day 1||£4.95|
2.50 - Orders over £40
| Premium AM||Mon-Fri Pre 12|
Mon-Fri Pre 10.30AM
| Premium Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Liberon Wax and Polish Remover:
Liberon Wax and Polish Remover leaves your surface ready for re-finishing and is approved by the Guild of Master Craftsmen.
Application: For best results, soak a pad of Liberon Ultra Fine Steel Wool (0000) in Wax and Polish Remover, squeeze out the excess and gently wash the surface going with the grain where possible. Allow a few minutes for the Wax and Polish Remover to work, then while the surface is still wet use a clean lint-free cloth to wipe off all the old softened wax. Repeat this process until all the old wax is removed.
Allow 24 hours for the treated surface to dry completely before re-finishing.
Important: This product may lift newly applied French polishes, lacquers, varnishes and sealers. Always test product on a spare surface or inconspicuous area for colour, compatibility and end results.
- Wear suitable heavy duty gloves.
- Do not pour into plastic containers or use on plastic or vinyl surfaces.
- Dispose of used steel wool and cotton cloths outside to reduce vapour build-up and fire hazard.
- Do not use on water based varnish.
Available in: 250 ml, 500 ml, 1 Litre and 5 Litres
Liberon Product Selection Guide for Furniture Care