Liberon Superior Danish Oil protects and feeds hard and soft woods with a blend of natural oils including pure tung oil.
It brings out the natural grain of the wood and achieves a soft, satin sheen finish.
Liberon Superior Danish Oil contains UV filters preventing discolouration from the sun and is suitable for exterior and interior use.
Liberon Superior Danish Oil has a quick drying formula, is water, heat and alcohol resistant and is completely safe for toys (EN71 Approved).
Please also see our full range of alternative wood Oils including Liberon Finishing Oil, Teak Oil or Tung Oil.
Please see the INFO tab above for Preparation and Application advice.
Recoatable 4-6 hours
Brush or Cloth applied
Coverage 10-12 SqMtrs per Litre per Coat
3 coats required
Clean equipment with White Spirits
Liberon Superior Danish Oil Reviews
| UK Mainland|
2-3 Days 1
FREE - Orders £40+
| DPD Express||Next Working Day 1||£4.95|
£2.50 - Orders £40+
FREE - Orders £90+
| DPD Pre 12||Mon-Fri Pre 12||£9.95|
| DPD Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| DPD Express||2 Day||£14.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| DPD Express||2 Day||£19.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
| DPD Express||2 Day||£19.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Liberon Superior Danish Oil:
Preparation - Remove any previous wax and varnish finishes and make sure surface is bare. Wood surface must be clean, dry and dust-free.
Application - Apply Liberon Superior Danish Oil with good quality brush such as a Mako Woodcare brush or lint-free cotton cloth, allowing to penetrate the wood for at least 5/10 minutes before removing excess with a clean lint-free cloth.
Leave to dry for a minimum period of five hours, a minimum of three coats is recommended. In areas such as a kitchen or bathroom, more coats will be required.
Preparation - All surface blackening or mould must be removed and surface left clean, dry and free from decaying timber.
Application - Apply as interior wood with at least four coats, which will give minimum protection.
There is no need to remove excess on sawn timber, but runs must be wiped clean. More exposed areas will require more coats.
This product is not recommended for Exterior Oak, instead, please see Liberon Tung Oil, Fiddes High Build Exterior Wood Oil or Osmo UV Protection Oil.
Please Note: As oil finishes bring out the natural colours of the wood and a wet surface is an indication of the final colour, always test Liberon Superior Danish Oil on a discreet area to establish the finished result.
Cleaning and maintenance after treatment
Interior Woodwork - Clean surfaces using a damp cloth, wiping any spills up immediately. Use a mild detergent for stubborn stains. Depending upon usage, surfaces need to be re-oiled once a year.
Exterior Woodwork - All surface grime, mould or any blackening of the timber needs to be removed, (sanding may be an option) before re-oiling can take place. Exterior woodwork needs to be maintained regularly at least twice a year.
Available in: 250ml, 500ml, 1 Litre, 2.5 litre and 5 Litre containers.
Coverage: 1 Litre - 10-12 SqMtrs
Liberon Product Selection Guide for Exterior Treatments
Liberon Product Selection Guide for Oil Finishes.