Liberon Raw Linseed Oil is a must for protecting and nourishing your wood! Use on close or hard grained wood, ideal for oiling your favourite cricket bat and EN71 Approved for use on children's toys. Used by French Polishers as a time-honoured lubricant! Liberon Raw Linseed Oil is ideal for adding to other oils to mix a unique blend.
Product use: Liberon Raw Linseed Oil is an original oil polish dating back for many centuries. It is hard wearing and has a rich, gloss like finish.
Please see the INFO tab above for Preparation and Application advice.
Liberon Product Selection Guide for Oil Finishes
Drying Time 48-72 hours
Brush or Cloth applied
Clean equipment with White Spirits
Coverage 8-10 SqMtrs per Litre per Coat
Liberon Raw Linseed Oil Reviews
| UK Mainland|
2-3 Days 1
FREE - Orders over £40
| Express Delivery||Next Working Day 1||£4.95|
£2.50 - Orders over £40
| Premium AM||Mon-Fri Pre 12|
Mon-Fri Pre 10.30AM
| Premium Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Liberon Raw Linseed Oil:
Preparation: Surface to be treated must be clean and dry, and free from any previous finishes before Liberon Raw Linseed Oil is applied.
Application: For easy application of the first few coats of Liberon Raw Linseed Oil, dilute up to 30% with Pure Turpentine. Alternatively, you can warm the oil in a container, standing in a bowl of hot water. When heating Raw Linseed Oil, do not dilute with Turpentine.
Use a Liberon Lint-free Cotton Cloth and rub well into the wood. After approximately 20-30 minutes wipe off any excess with a clean lint-free cloth. Failure to remove any excess will leave a sticky surface and prevent saturation of further coats. With a few days apart, repeat the process as above, When the final application of Liberon Raw Linseed Oil is applied, wipe of any excess and allow to harden for at least two/three days before use.
You may use Liberon Ultra Fine Steel Wool (0000) lightly between coats to improve the final finished look. If a surface is damaged, work in a new coat.
Please note: As oil finishes bring out the natural colours of the wood and a wet surface is an indication of the final colour, always test Liberon Raw Linseed Oil on a discreet area to establish the finished result.
Maintenance: In the first instance, wipe treated surface with a damp cloth and buff dry. Depending upon usage, re-oil when required.
Liberon Raw Linseed Oil is available in: 250ml, 500ml, 1 litre and 5 litre containers.
Coverage: 1 Litre - 8-10 SqMtrs