Liberon Palette Wood Dye 500ml can be used for dyeing and colouring all interior bare woodwork around the home. Suitable for both soft and hardwood.
Liberon Palette Wood Dye:
- Achieves quick and uniform results on large or small surfaces.
- Allows the wood grain to show through.
- Ideal for use on floors, furniture, doors, cupboards, and frames.
- Safe for toys - EN 71 Part 3 Approved.
- Available in a range of wood shades.
- Different colours can be mixed to vary the shade.
The above Info tab gives full Preparation and Application advice.
Also available: 250ml and 5 litre.
There is a short Liberon video, on the above Video tab, that shows how Palette Wood Dye may be added to water-based varnishes, such as Liberon Natural Finish Varnish and Natural Finish Floor Varnish, to create a range of coloured finishes.
Please visit our Wood Stains and Dyes section to view our full range of alternative stains, including Fiddes, Liberon and Rustins spirit dyes.
Recoatable 2-3 hours
Clean equipment with Water
Coverage 8-10 SqMtrs per Litre per Coat
Liberon Palette Wood Dye 500ml Reviews
Liberon Palette Wood Dye 500ml Video
| UK Mainland|
2-3 Days 1
FREE - Orders over £40
| Express Delivery||Next Working Day 1||£4.95|
£2.50 - Orders over £40
| Premium AM||Mon-Fri Pre 12|
Mon-Fri Pre 10.30AM
| Premium Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Liberon Palette Wood Dye 500ml
Application: Shake well before use. Apply the Palette Wood Dye along the grain using a foam applicator or good quality brush such as the Mako Acer Pro brush. Wipe off excess with a clean, dry, cotton cloth before it dries to even out the colour. On large surfaces such as floors try to avoid overlap marks by working a small section at a time or lightly brushing over with a dry Foam Applicator/Brush.
Please note that the colour bar may not be a true representation of the actual colour.
Drying time: Minimum of two hours.
Coverage: 500ml litre - 4-8 SqMtrs/ coat.
Clean Equipment: Water.
Coats: A second coat may be applied after 2 hours if a stronger colour is required.
We recommend either over-coating with a spirit based varnish like Fiddes Clear Glaze or Rustins Yacht Varnish or mixing with a water based varnish like Natural Finish Varnish.
Further information can also be found on Liberon's Data sheet.