Rest Express
Rest Express
01285 831668

Mon - Fri 8am - 5pm

Rest Express
Rest Express
Rest Express

Liberon Natural Finish Floor Varnish 1 litre/750ml

Liberon Natural Finish Floor Varnish 1 litre/750ml


Please select finish


Coverage Calculator   v
Coverage Calculator   ^

Enter area to be covered


Coats: 3   Amount Req.


Liberon Natural Finish Floor Varnish 1 litre is a water-based hard wearing and long lasting floor varnish that is designed for use on softwood and hardwood flooring.

To keep the natural feel and look of your timber, Liberon Natural Finish Floor Varnish has a non-yellowing, quick drying formula. It can also be coloured using Liberon Palette Wood Dyes upto a ratio of 10:1, please see the video below.

Also available: 2.5 litre

  • Maintains the natural feel and look of the timber
  • European Eco-label scheme approved
  • Water based, low VOC
  • Highly resistant to scratches and stains
  • Provides a hard, durable and long lasting finish
  • EN71 Part 3 Approved - Safe for toys
  • Suitable for use in kitchens and bathrooms
  • Endorsed by the Guild of Master Craftsmen

The INFO tab above has full preparation and application advice.

The short Liberon VIDEO above shows How to protect and apply a varnish finish to a natural wooden floor.

Please also see Liberon High Resistance Floor Varnish and our Flooring Finishes section for a full range of alternative floor varnishes from leading manufacturers including Ronseal.

      Liberon Product Selection Guide for Wood Flooring

Drying Time upto 24 hours IconDrying Time upto 24 hours

Recoatable 2-3 hours IconRecoatable 2-3 hours

Brush or Roller applied IconBrush or Roller applied

3 coats required Icon3 coats required

Clean equipment with Water IconClean equipment with Water

Liberon Natural Finish Floor Varnish 1 litre/750ml Reviews

Feedback for Liberon Natural Finish Floor Varnish - Wax Effect - 750ml has been compiled from 0 reviews.

DateProductScoreCustomer Comment

Liberon Natural Finish Floor Varnish 1 litre/750ml Video

Delivery Information

 UK Mainland
 Standard Delivery

2-3 Days 1

FREE - Orders over 40
 Express DeliveryNext Working Day 1
£2.50 - Orders over £40
 Premium AMMon-Fri Pre 12
Mon-Fri Pre 10.30AM
 Premium Saturday Saturday 9:00-17:00 £9.95

 Scottish Highlands, Islands, Isle of Wight, Isle of Man

 Standard Delivery 3-4 Days £6.95
 Northern Ireland
 Standard Delivery3-4 Days £9.95
 Republic of Ireland and Channel Islands
 Standard Delivery 3-4 Days£14.95

1 Order online before 5pm Monday - Friday for same day dispatch.

Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire

Offshore Postcodes:
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands

Liberon Natural Finish Floor Varnish - 1 litre:

Preparation: Sand the floor if required and remove all previous finishes. Ensure the surface is clean, dry and dust free.

Application: Shake and stir well before use. Apply a reasonable coat of varnish evenly using a good quality brush such as Mako 4* Pro or a short hair Microfibre roller and allow to dry for a minimum of 2 hours before applying further coats.

On large floor areas the use of a Mako Floor Brush will speed up the application and enable a professional finish to be achieved. For maximum protection a minimum of 3 coats should be applied, sanding lightly between coats if required. Allow the final coat of varnish a minimum of 24 hours drying time before using the floor.

Please note, always test product on a spare surface or inconspicuous area for colour compatibility and end result. Product may slightly darken some woods.

Liberon Natural Finish Floor Varnish is not suitable for applying over an oil based sealer.

Coverage:10-12 SqMtrs/ litre/ coat
Application:Brush or roller
Drying Time: Min. 2 hours
Tool Cleaning:Water

Liberon Advice In order to avoid bubbles forming on the surface of the varnish when using a roller we recommend the use of a short hair roller and that work is not carried out at temperatures above 25C.

Available in: 750 ml and 2.5 litre

Finishes: Clear Matt (soft sheen) and Clear Satin

Back to top