Liberon Floor Sealer is water, heat and alcohol resistant and being oil based will enhance the natural colour and beauty of old or new and parquet flooring.
It will help to protect against stains and scratching and it is also suitable for sealing unvarnished cork surfaces.
Liberon Floor Sealer can be used on its own to achieve a final satin to gloss finish, or as a sealer prior to waxing or varnishing with Liberon's range of floor finishing products.
The two VIDEOs above give guidance on Wood Preparation and How to achieve a traditional finish that also gives long lasting protection and enhances your wooden floor.
Liberon Floor Sealer is EN71 Part 3 Approved - Safe for toys and endorsed by the Guild of Master Craftsmen.
See the INFO tab above for Preparation and Application advice.
Please also see our Flooring Finishes section for the full range of flooring products stocked including Liberon High Resistance Floor Varnish, Floor Oil, Floor Wax or Natural Finish Floor Varnish.
Liberon Product Selection Guide for Wood Flooring
Brush or Cloth applied
Clean equipment with White Spirits
Coverage 8-10 SqMtrs per Litre per Coat
Liberon Floor Sealer Reviews
Liberon Floor Sealer Video
| UK Mainland|
2-3 Days 1
| Express Delivery||Next Working Day 1||£4.95|
FREE - Orders over £60
| Premium AM||Mon-Fri Pre 12|
Mon-Fri Pre 10.30AM
| Premium Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Liberon Floor Sealer for wooden floors:
|Coverage:||8-10 SqMtrs/ litre/ coat|
|Application:||Brush, Roller or Cloth|
|Drying Time: ||5 hours minimum|
|Tool Cleaning:||White Sprits|
|Packaging:||1 Litre or 5 Litre|
Preparation: Sand the floor if required and remove all previous finishes. Ensure the surface is clean, dry and dust free. If you wish to colour the wood use Liberon Palette Wood Dye prior to applying Floor Sealer.
Application: Shake the container well before use. Apply a coat of Floor Sealer with a good quality brush such as Mako 5* Pro Woodcare Brush, short pile Microfibre roller or cloth. Allow the oil to penetrate for 5-10 minutes then remove the excess with a dry lint-free cloth/ rag. We recommend a minimum of 3 coats allowing 5 hours between coats. Additional coats may be required on porous surfaces or to achieve a higher sheen finish. Liberon Floor Wax or High Resistance Floor Varnish may be applied after sealing, please allow 24 hours for the last coat of Floor Sealer to harden before applying.
Important: Oil finishes bring out the natural colours of the timber. A few drops of water on the surface will be an indication of the final colour.
Cleaning and maintenance: Surfaces may be cleaned with a damp cloth. Any spills should be wiped up immediately. For stubborn stains a mild detergent can be used, alternatively lightly sand the affected area to remove the stain and then re-apply Floor Sealer. When using Floor Sealer alone surfaces may need to be re-sealed once a year in areas of high foot traffic.