Liberon Finishing Oil is a unique blend of premium oils which feed, nourish and enhance the colour of your wooden surface.
Finishing Oil is heat, alcohol and food acid resistant and is recommended for surfaces such as worktops, kitchen tables and bathroom furniture which all require a hard wearing and water resistant finish.
It is also suitable for all types of bare wood to give a matt - satin finish, depending upon the number of coats applied.
Liberon Finishing Oil can be applied to cork, stone and terracotta.
EN71 Approved - safe for toys and guaranteed to be water, heat, alcohol and food acid resistant!
The short VIDEO above shows how to extend the life of a wooden kitchen table or worktop using Finishing Oil or water-based Kitchen and Bathroom varnish.
Please see the INFO tab above for Preparation and Application advice.
Please also see our full range of alternative wood finishing Oils including Liberon Danish Oil, Teak Oil, Tung Oil and Osmo Top Oil or Door Oil.
Recoatable 4-6 hours
Brush or Cloth applied
Coverage 10-12 SqMtrs per Litre per Coat
3 coats required
Clean equipment with White Spirits
Liberon Finishing Oil Reviews
Liberon Finishing Oil Video
| UK Mainland|
2-3 Days 1
FREE - Orders over £40
| Express Delivery||Next Working Day 1||£4.95|
2.50 - Orders over £40
| Premium AM||Mon-Fri Pre 12|
Mon-Fri Pre 10.30AM
| Premium Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Liberon Finishing Oil:
Preparation: Ensure the surface is bare: remove any wax finishes with Liberon Wax and Polish Remover and any varnish finishes with Paint and Varnish Remover. Clean, dry and ensure the surface is dust free. If required stain the wood with Liberon Palette Wood Dye before oiling.
Application: Apply a coat of Liberon Finishing Oil using a brush or lint-free cotton cloth. Allow the oil to penetrate for up to 10 minutes then wipe off all the excess with a clean lint-free cloth, before the surface dries enough to become sticky. Allow to dry for a minimum of 5 hours and apply more coats as required.
Liberon recommend a minimum of three coats. The more coats applied the higher the sheen and the more durable the finish will be. For best results gently rub with Liberon Ultra Fine Steel Wool (0000) between coats. Furniture items may be finished with Liberon Black Bison Wax Polish for an improved lustre.
Important: Oil finishes bring out the natural colours of timber. A wet surface will be an indication of the final colour. Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.
Cleaning and maintenance: Surfaces may be cleaned using a damp cloth and spills should be wiped up immediately. For stubborn stains a mild detergent can be used. Surfaces need to be re-oiled once a year or more, depending upon usage.
|Coverage:||1 Ltr – 10/12 SqMtrs |
|Application:||Brush or cloth |
|Drying time:||Minimum 5 hours |
|Tool cleaning:||White spirit |
Available sizes: 250 ml, 500 ml, 1 litre, 5 litre and 25 litre containers.
Liberon Product Selection Guide for Oil Finishes