Liberon Easy French Polish is easy to use for beginners to furniture restoration and produces wonderful results quickly.
Liberon Easy French Polish is recommended for use on furniture, carved woodwork and the like, beautifully enhancing the wood's natural finish.
It is ideally suited for use on small surfaces.
Please also see the INFO tab for preparation and application advice.
Liberon Guide to French Polishing
Please see our Liberon section for the full product range and our Shellac Sealers and Polishes section for alternative products stocked.
Recoatable 3-4 hours
Brush or Cloth applied
Coverage 6-8 SqMtrs per Litre per Coat
Liberon Easy French Polish Reviews
| UK Mainland|
2-3 Days 1
| Express Delivery||Next Working Day 1||£4.95|
FREE - Orders over £60
| Premium AM||Mon-Fri Pre 12|
Mon-Fri Pre 10.30AM
| Premium Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Liberon asy French Polish:
Ensure the surface is clean, dry and bare, removing any previous finishes with Liberon Wax and Polish Remover or Liberon Fine Wood Stripper. If the wood is to be dyed or stained, this must be completed prior to the application of Liberon Easy French Polish. Sand with extra fine abrasive paper and remove any dust with a tack cloth.
Using a good quality lacquer brush or lint-free cloth apply a thin coat of Easy French Polish, working with the grain of the wood. Allow a drying time of 3 to 4 hours then gently rub down the dried coat using Ultra Fine Steel Wool (grade 0000) for a smooth finish. Remove any dust.
Apply additional coats as required, following the instructions above. Three to four coats are usually sufficient to achieve a quality finish.
For a higher gloss finish use Liberon Burnishing Cream once the last coat has hardened for 7 days. For a soft sheen use Liberon Furniture Wax.
French Polishes are best applied in a warm, dust-free environment.
Please note, always test product first on a spare surface or inconspicuous area for colour, compatibility and end result.
Easy French Polish is available in 250 ml and 500 ml containers.