Use Liberon Boiled Linseed Oil for a mellow, high sheen to new or stripped bare wood. It is very similar to Liberon Raw Linseed Oil, but has had hot air passed through it to increase drying times.
Boiled Linseed Oil is traditionally used to seal terracotta and stone floors, giving a hard wearing finish.
Product Use: Liberon Boiled Linseed Oil is recommended for use on all types of wood, creating a mature, gloss finish.
Do not use Boiled Linseed Oil on exterior Oak - use Liberon Pure Tung Oil.
Liberon Boiled Linseed Oil can also be used to seal tiles and other porous surfaces before applying wax.
Please see the INFO tab above for Preparation and Application advice.
Also our Oils Section for alternative oil finishes and our Liberon section for the full product range.
Liberon Product Selection Guide for Oil Finishes
Drying Time upto 24 hours
Brush or Cloth applied
3 coats required
Clean equipment with White Spirits
Coverage 8-10 SqMtrs per Litre per Coat
Liberon Boiled Linseed Oil Reviews
| UK Mainland|
2-3 Days 1
FREE - Orders £40+
| DPD Express||Next Working Day 1||£4.95|
£2.50 - Orders £40+
FREE - Orders £90+
| DPD Pre 12||Mon-Fri Pre 12||£9.95|
| DPD Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| DPD Express||2 Day||£14.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| DPD Express||2 Day||£19.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
| DPD Express||2 Day||£19.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Liberon Boiled Linseed Oil:
Preparation: Remove any previous finish from the surface to be treated and ensure it is clean and dry.
Application: When applying the first few coats of Liberon Boiled Linseed Oil, dilute with up to 30% Pure Turpentine. Using a Liberon Lint-free Cotton Cloth, rub well into the wood and after approximately 20 minutes, wipe off any excess with a clean lint-free cloth. Failure to do this exercise will leave a sticky residue, preventing penetration of future coats.
Repeat the previous steps at least twice, leaving 24 hours in between. Apply a final coat of Liberon Boiled Linseed Oil, wiping off any excess after approximately 20 minutes.
For a professional finish, lightly rub the surface between applications with Liberon Ultra Fine Steel Wool (0000).
Please note: As oil finishes bring out the natural colours of the wood and a wet surface is an indication of the final colour, always test Liberon Boiled Linseed Oil on a discreet area to establish the finished result.
Maintenance: In the first instance, wipe treated surface with a damp cloth and buff dry. Depending upon usage, re-oil when required.
Available in: 500ml and 1 litre containers.
Coverage: 1 Litre - 8-10 SqMtrs