Liberon Black Bison Liquid Wax 5 litre contains a blend of natural waxes, including Carnauba Wax and is a little easier to apply over large surfaces, such as panelling, doors, staircases and other large interior woodwork areas than standard paste wax.
Liquid Wax Polish Black Bison:
- Feeds, polishes and helps to prevent wood from drying out.
- Well-known for its quality and pleasant, distinctive aroma.
- Gives good resistance to finger and water marks.
- Gives a highly lustrous and hard wearing finish.
- Helps to cover marks and scratches.
- A quality wax polish that is endorsed by the Guild of Master Craftsmen.
Also available: 500ml.
The above Info tab includes preparation and application advice.
Please also see our Wax Polishes section for a full range of alternative waxes; including Liberon Black Bison Paste Wax, Liberon Beeswax Paste for unsealed hard or softwoods, and Liberon Liquid Beeswax for large surfaces areas such as panelling and beams.
Brush or Cloth applied
Coverage 10-12 SqMtrs per Litre per Coat
1-2 coats required
Liberon Black Bison Liquid Wax 5 litre Reviews
| UK Mainland|
2-3 Days 1
FREE - Orders over £40
| Express Delivery||Next Working Day 1||£4.95|
£2.50 - Orders over £40
| Premium AM||Mon-Fri Pre 12|
Mon-Fri Pre 10.30AM
| Premium Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Liberon Black Bison Liquid Wax - 5 litre.
Surface must be clean, dry and dust free.
Use Liberon Wax and Polish Remover and 0000 Steel Wool if necessary, to clean wood of old wax and dirt.
White water rings or heat marks can be removed using Liberon Ring Remover.
Fill any gaps or imperfections with Wax Filler Sticks or Shellac Filler Sticks.
Scratches can be touched up with Touch-up Pen, Retouch Crayons or Retouch Cream.
Always shake well before use and apply wax sparingly with a clean stockinette, or brush. Allow to dry for approximately 30 minutes, or until touch dry and buff with a clean cotton cloth. Repeat the application on new or very dry wood, as this may require a further two coats. For a professional finish, apply thin coats of wax and build-up to your required level of sheen, buffing inbetween coats.
When the surface begins to look dull and tired, re-wax. To clean and revive highly polished wooden surfaces use Liberon Burnishing Cream before re-waxing. Do not wash wood with water.
Do not use on high water areas such as bathrooms or kitchens.
- Usage: Interior.
- Coverage: 5 Ltr - 50-60 SqMtrs.
- Application: cloth, spray or brush.
- Drying Time: Minimum 1 hour.
- Cleaning Equipment: White Spirit.
Liberon Beeswax Paste is EN71 Part 3 Approved for use on toys and is accepted by the Guild of Master Craftsmen.
Please see Liberon Product Selection Guide for furniture care advice.