Hammerite Direct to Rust Metal Paint Smooth Aerosol is specially formulated to perform as primer, undercoat and topcoat in one easy application. It can be applied directly to rust, is quick drying and easy to use and gives long lasting protection.
For more information please also see Hammerite Special Metals Primer, Hammerite Brush Cleaner & Thinners and Hammerite No.1 Rust Beater. We also supply a range of Interior and exterior Paint.
3 coats required
Hammerite Smooth - Black - 400ml Aerosol Reviews
| UK Mainland|
2-3 Days 1
FREE - Orders over £40
| Express Delivery||Next Working Day 1||£4.95|
£2.50 - Orders over £40
| Premium AM||Mon-Fri Pre 12|
Mon-Fri Pre 10.30AM
| Premium Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Hammerite Aerosol Direct to Rust:
Preparation: Remove all loose rust and flaking paint with a wire brush. Then wash the surface down with a mild detergent solution removing any dirt and dust. Remove grease with Hammerite Brush Cleaners & Thinners. Rinse with clean water and allow to dry.
Pre-application on a painted surface: Spray a test patch direct onto the surface and leave to dry for at least 1 hour. If there is no reaction continue spraying. If there is a reaction, remove all paint from the surface.
On bare zinc, aluminium and galvanised surfaces, apply Hammerite Special Metals Primer, before spraying with this product.
Application: Store aerosol at room temperature for 2 hours prior to use. Shake can vigorously, in a vertical motion, until the agitator ball is heard and then for a further 3 minutes. Apply light even coats, from a distance of approximately 15cm (6"), keeping the can moving. Do not concentrate on one spot. Apply at least 3-4 coats for maximum protection.
Allow 15 minutes between coats. Between coats invert can and spray for 2 seconds to avoid blockages. Please note this product is not suitable for use on toys.
Cleaning: Invert can and spray for 2 seconds.
Coverage: 400ml covers approximately 0.5 square metres with 3-4 coats