Prior to the application of Fiddes Supreme Hard Wax Oil or Fiddes Liquid Floor Wax, use Fiddes Barrier Seal to provide a quick drying, surface barrier coat.
It is designed particularly for use on oily, reclaimed or contaminated floor surfaces to provide a barrier under the finished surface product such as Hard Wax Oil, Water based or Solvent based Varnishes
For an alternative product, please also see Mylands Barrier Seal.
Coverage 12-15 SqMtrs per Litre per Coat
Clean equipment with White Spirits
Fiddes Barrier Seal Reviews
| UK Mainland|
2-3 Days 1
| Express Delivery||Next Working Day 1||£4.95|
FREE - Orders over £60
| Premium AM||Mon-Fri Pre 12|
Mon-Fri Pre 10.30AM
| Premium Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Fiddes Barrier Seal:
Preparation: Ensure any previous floor finish has been removed. Sanding may be necessary where contamination is severe. Wash using solution of Fiddes Floor Surface Cleaner and allow to dry. Gaps can be filled with Fiddes Joint Gel Filler
Application: Stir contents thoroughly before and during use and apply in a warm well ventilated room. Use a good quality bristle or synthetic brush and lay evenly in the direction of the grain.
Fiddes Barrier Seal will dry in 15 minutes under good conditions and may be thinned by 10-15% with Methylated Spirits where appropriate.
Please note, significantly longer drying times will occur under cold, damp or humid conditions.
On dense oily timbers, apply maximum one coat. Always pre-test on a small area first.
Coverage: Approximately 14 square metres per litre depending on absorbency of wood.
Clean equipment: White Sprits