Everbuild 908 Black Bitumen DPM is an odourless rubber enriched bitumen which gives a very effective damp proof membrane layer for floors, it is brown in colour but dries black.
Everbuild 908 DPM also acts as a very good waterproofer for above ground structures and foundations including walls. It is also suitable as an adhesive for wooden block floors, expanded polystyrene, insulation boards and cork.
- Interior or Exterior use
- Safer to use – water clean-up
- Suitable for use as an adhesive
- Forms an impervious water barrier on most surfaces
Standard areas of use:
- Fixing wooden parquet floor blocks
- Fixing insulation boards, cork slabs or expanded polystyrene
- Sandwich DPM for floors and waterproofing retaining walls etc
- General waterproofing on concrete, render, plaster and fibre cement
Please also see our Everbuild products section for our full range of stocked items, plus Everbuild 901 Black Bitumen Paint, Polycell One Coat Damp Seal or the Thompson Waterseal range for alternative waterproofing solutions.
Drying Time upto 12 hours
2 coats required
Everbuild 908 Black Bitumen DPM - 5 litre Reviews
| UK Mainland|
2-3 Days 1
| Express Delivery||Next Working Day 1||£4.95|
FREE - Orders over £60
| Premium AM||Mon-Fri Pre 12|
Mon-Fri Pre 10.30AM
| Premium Saturday ||Saturday 9:00-17:00 ||£9.95|
Scottish Highlands, Islands, Isle of Wight, Isle of Man
| Standard Delivery|| 3-4 Days|| £6.95|
| Northern Ireland|
| Standard Delivery||3-4 Days ||£9.95|
| Republic of Ireland and Channel Islands|
| Standard Delivery ||3-4 Days||£14.95|
1 Order online before 5pm Monday - Friday for same day dispatch.Highland Postcodes:
AB30-38, AB44-56, FK17-21, G83, IV (all), KW0-14, PH17-32, PH34-48
Aberdeenshire, Angus, Argyllshire, Ayrshire, Caithness, Highland, Invernes-shire, Perthshire, Ross-shire, Stirlingshire
BT (all), HS1-9, IM (all), KA27-28, KW15-99, PA20-99, PH33, PH49-99, PO30-41, ZE (all)
Northern Ireland, Republic of Ireland, Isle of Man, Isle of Wight, Channel Islands and Scottish Islands
Everbuild 908 Black Bitumen DPM - 5 litre:
Stir well before use. Ensure the surface is clean, touch dry and free from any contaminants which may affect the adhesion. Porous surfaces should be primed with a coating of 908 DPM diluted 1:6 with water and allowed to dry before applying further coats.
Damp-proofing Floors: Apply by brush across the floor and up the wall to the existing damp-proof course (DPC) at the rate of 800ml per SqMtr. Allow the first coat to dry before applying a second at right-angle to the first. When dry Everbuild 908 DPM can be overlaid with a concrete screed 50mm thick.
Fixing Parquet/ Block Flooring: Wooden blocks 12mm or thicker can be stuck in place by dipping the bottom surface in 908 DPM and immediately placing into position, giving a coverage approximately 1 litre/ SqMtr.
Where underfloor heating is incorporated into the sub floor, the heating must be turned off for at least 48 hours before and after laying the floor.
Clean Tools: When wet – with water; When dried – with White Spirits or Paraffin
Coverage: 1-2 SqMtrs/ litre/ coat
Drying Time: 4-6 hours
Shelf Life: 24 months from manufacture, protect from frost