Woodworking Supplies Nationwide

Telephone: 01285 831668

View Basket

Checkout

Search for Products:

Abrasives and Steel Wool

Adhesives

Bandsaw Blades

Brushes, Mops and Rollers

Oils Spirits and Solvents

Protective Equipment

Sealants and Putties

Shellac Sealers and Polishes

Strippers and Bleaches

Woodfillers and Stoppers

Rest Express are proud to be Official Distributors of the following Manufactures:

Liberon Floor Oil

Liberon Floor Oil - 2.5 litre

Liberon Floor Oil will give a stain and scratch resistant finish against daily wear and tear. Liberon Floor Oil is micro porous, allowing the wood to breathe and is water, heat and alcohol resistant too!

Liberon Floor Oil is designed for use on all types of untreated real wood floors, preserving the natural look of the wood. With its slip resistant finish, Liberon Floor Oil is ideal for use in kitchens and bathrooms.

Preparation: Sand the floor if required and remove all previous finishes. Ensure the surface is clean, dry and dust free. If you wish to colour the wood use Liberon Wood Floor Dye prior to applying Floor Oil.

Application: For best results apply with a brush, cloth or roller working with the grain of the wood wherever possible. Allow the oil to penetrate into the wood for 10-20 minutes, then wipe over the surface with a clean, dry lint free cloth to remove any excess oil. Failure to do so will reduce penetration of subsequent coats and produce an uneven finish.

A minimum of 3 coats is recommended, sanding lightly between coats. More coats may be required on porous timbers or for a more durable finish. Allow a minimum of 8-12 hours between coats and 24 hours after the last coat before heavy use of the floor.

Important: Oil finishes bring out the natural colours of timber. A wet surface will be an indication of the final colour.

Cleaning and maintenance: Surfaces may be cleaned using a damp cloth and spills should be wiped up immediately. For stubborn stains a mild detergent can be used, alternatively lightly sand the affected area to remove the stain and then re-apply Liberon Floor Oil.

Re-oil surfaces when they become dull and dry. To check the surface is properly sealed drop a small amount of water onto the surface. Leave for 10-15 minutes and if the water remains on the surface then enough Floor Oil has been applied. If not then further coats of Floor Oil are required.

Coverage:          1Ltr - 10-12 SqMtrs
Application:        Brush or cloth
Drying time:        Minimum 12 hours
Tool Cleaning:    White Spirit
Usage:            Interior

Packaging: Liberon Floor Oil is available in 1Ltr, 2.5Ltr containers.

Price: £22.53 (£26.47 Including VAT at 17.5%)

website designed & produced by Weblinks Advertising Limted