Woodworking Supplies Nationwide
Telephone: 01285 831668
Home
|
About Us
|
Location
|
Enquiries
|
Links
|
Delivery, Terms & Conditions*
View Basket
Checkout
Search for Products:
Abrasives and Steel Wool
Adhesives
Bandsaw Blades
Brushes, Mops and Rollers
Dowel and Stringing
Exterior Finishes
Floor Finishes
Dowel and Stringing
Glazes and Varnishes
Nails and Screws
Oils Spirits and Solvents
Protective Equipment
Sealants and Putties
Shellac Sealers and Polishes
Strippers and Bleaches
Sundries
Tools
Wax Polishes
Wax Products
Wood Stains and Dyes
Wood Treatments
Woodfillers and Stoppers
Rest Express are proud to be Official Distributors of the following Manufacturers:
BRIWAX
CUPRINOL
EVERBUILD
FIDDES
JENKINS
LIBERON
MAKO
MIRKA
MYLANDS
RONSEAL
RUSTINS
ABOUT SSL CERTIFICATES
Langlow Abicide Fungicidal Wash
Langlow Abicide Fungicidal Wash - 1 litre
Langlow Abicide Fungicidal Wash
Langlow Abicide Fungicidal Wash is recommended to prevent and eradicate the growth of mould, algae and fungi on most common masonry surfaces. Ideal for use on paving, block-work, concrete driveways, stone and concrete.
Also suitable to be used on most common types of masonry wall surfaces, although a small test area application is recommended to verify compatibility.
Ideal for use on site, as the concentrated formula allows the end user to dilute immediately, 5 litres of ready to use product from a single 1 litre container of concentrate.
Langlow Abicide Fungicidal Wash dilutes to a water-thin ready to use consistency, which is ideal for spray application where large areas of paving are to be treated.
Preparation:
Prepare a surface by removing all established fungal growths and any other unwanted vegetation using a scraper or a stiff brush to reveal bare masonry. Dilute product at a rate of 1 part to 4 parts water and shake well before use to ensure consistency. Do not apply where there is a risk to running watercourses or fish ponds and any run off of the product to surrounding vegetation should be saturated with water.
Application:
Paths and patios may be treated using a watering can fitted with a disperser head to ensure complete and consistent coverage. Areas affected by extensive, well-established mould growth may be treated with a stronger dilution of 1 part Fungicidal wash to 2 parts water following the removal of all unwanted vegetation. Allow the solution to stand for about 5 minutes then vigorously scrub it into the surface with a stiff yard brush to ensure complete penetration. Allow a further 20 to 30 minutes for the solution to soak into the masonry then rinse off any excess treatment with hose applied water, directed to a nearby drain where possible.
Coverage:
Depending upon the texture and porosity of the masonry surface, Abicide when applied as single coat, will cover as 1 litre of diluted product being effective over 8 to 20 square metres depending on the condition, texture and porosity of the treated surface. Repeat applications may be necessary on areas where mould and algae has been previously well established, or where the substrate is particularly porous and friable.
Storage:
Store in cool, well-ventilated conditions and do not expose to frost or extreme temperatures.
Langlow Abicide Fungicidal Wash is available in 1 litre poly bottles
Price: £5.00
(£6.00 Including VAT at 20%)
website designed & produced by
Weblinks Advertising Limted