Woodworking paint supplies store
Customer Services 01285 831668 (Mon - Fri 8am to 5pm)
Hammerite Direct to Rust Metal Paints have been specially formulated to form a tough and attractive barrier which will protect and resist knocks and scrapes whilst maintaining a beautiful finish for longer than standard metal paints.Hammerite Paints Smooth - Special Offer 750ml+33% FREE! - Black and Silver only
Due to Hammerite's unique 3 in 1 formulation, Hammerite Direct to Rust Metal Paint can be painted directly onto a rusty surface without the need for using a separate primer and undercoat.
Hammerite is available in attractive Smooth or Hammered finishes, offering long lasting protection for up to 8 years! It is corrosion resistant, containing pigments that give an additional barrier of protection by reacting with the atmosphere.
Hammerite Metal Paints are touch dry in 2 hours and recoatable in 4 hours, making them suitable for use on a wide range of household and commercial metal surfaces including Railings, Gates, Garden Furniture, Bedsteads and much more!
Preparation: Remove all loose rust and flaking paint with a wire brush. Then wash the surface down with a mild detergent solution removing any dirt, dust or grease. Rinse with clean water and allow to dry.
Pre-application on a painted surface: Paint a small test area with Hammerite and leave for 1 hour. If there is no reaction you are clear to proceed and paint the rest of the surface. If there is a reaction, remove all existing paint prior to painting with Hammerite.
On bare galvanised metal surfaces including aluminium, copper, brass, chrome and stainless steel, use Hammerite Special Metals Primer prior to painting with Hammerite Metal Paint.
Application: Lightly stir, not too vigorously, before application in an ideal temperature range of 8 - 25DegC. Hammerite can be brushed, sprayed or rollered. Previously painted surface may only require a single coat, bare or rusty surfaces will require 2 coats.
Cleaning: Remove as much paint from your brushes as possible and clean with Hammerite Brush Cleaner and Thinners.
Coverage: 5 SqMtrs/ litre/ coat
Available in: 750ml, 2.5 litres, and 5 litres (limited colours)
Hammerite Full Colour Range: Black, Blue, Copper, Cream, Dark Green, Gold, Red, Silver, White and Yellow
We also supply a range of Interior and exterior Paint.
Colour charts are intended as a guide only and actual results achieved may vary.