Woodworking Supplies Nationwide
Telephone: 01285 831668
Home
|
About Us
|
Location
|
Enquiries
|
Links
|
Delivery, Terms & Conditions*
View Basket
Checkout
Search for Products:
Abrasives and Steel Wool
Adhesives
Bandsaw Blades
Brushes, Mops and Rollers
Dowel and Stringing
Exterior Finishes
Floor Finishes
Dowel and Stringing
Glazes and Varnishes
Nails and Screws
Oils Spirits and Solvents
Protective Equipment
Sealants and Putties
Shellac Sealers and Polishes
Strippers and Bleaches
Sundries
Tools
Wax Polishes
Wax Products
Wood Stains and Dyes
Wood Treatments
Woodfillers and Stoppers
Rest Express are proud to be Official Distributors of the following Manufacturers:
BRIWAX
EVERBUILD
FIDDES
JENKINS
LIBERON
MAKO
MIRKA
MYLANDS
RUSTIN'S
ABOUT SSL CERTIFICATES
Everbuild Roll and Stroll Hard Surface Protector
Roll and Stroll Hard Surface Protector
Protect your internal hard surfaces from dirt, staining, spillages and soiling which occurs whilst work is being carried out, such as plastering, painting, tiling, general maintenance and repair work by using
Everbuild Roll and Stroll Hard Surface Protector!
Roll and Stroll Hard Surface Protector is recommended for surfaces such as timber, ceramic tiles, laminate flooring, vinyl, metal and stone. You can also use Roll and Stroll Hard Surface Protector on window sills, doors, worktops, kitchen units and glass.
Everbuild Roll and Stroll Hard Surface Protector is 100% waterproof and as the adhesive face is reverse wound, Roll & Stroll unwinds easily with no effort and no back bending!
Benefits
No special applicator is required, simply roll out
Non creep and wrinkle, stays where it is laid!
100% waterproof
No more expensive paint or varnish spillages to clean
Removes easily with no sticky residue
Use for up to four weeks
Use on most types of hard surface
No more dust sheets which can be unsafe
Application:
Ensure the surface where Everbuild Roll and Stroll Hard Surface Protector is being laid is free of dust and is dry. Remove outer packaging from the roll and place on the area facing in the direction it is to be applied and unwind approximately 300mm. Make sure the roll is stuck by smoothing out with hands or feet, then simply push the roll forward in a straight line.
An effective way of laying Everbuild Roll and Stroll Hard Surface Protector, is to push it along the floor with a soft broom, using this to smooth out and remove air bubbles, if any, whilst in unwinds. When applying Everbuild Roll and Stroll Hard Surface Protector to glass, worktops, etc., smooth out by hand until required length is reached, then carefully cut Roll and Stroll with a sharp knife or scissors, taking care not to damage the covered surface.
For carpets use
Everbuild Roll and Stroll Carpet Protector
. Everbuild Roll and Stroll Hard Surface Protector must be removed after a maximum of four weeks to ensure the sticky residue is not left, but always check it is firmly stuck to your hard surface before work commences. If a sticky residue is left on certain surfaces, this can be easily removed with Everbuild Wonder Wipes or a hard surface cleaner. Always check a small area for compatibility with surface cleaner.
Colour and Sizes
Clear 25m x 600mm
Clear 75m x 600mm
All Prices Exclude VAT
Please select size
Roll & Stroll Hard Surface Pro. 600mm x 25m (+£15.03 Excluding VAT)
Roll & Stroll Hard Surface Pro. 600mm x 75m (+£41.50 Excluding VAT)
website designed & produced by
Weblinks Advertising Limted